Brother BAS-761 Instruction Manual page 47

Chapter 2 Programming with Help Function
3
Programming a new point
1. Select with
2. Move the needle with
needle point is at 1'.
Record the coordinates (values of X and Y).
3. Press .
1' is programmed.
4. Move the needle with
opposite position of coordinates recorded
in step 2 so that the needle point is at 1 of
the pattern.
5. Press .
1 is programmed again.
6. Press .
ESC ESC
4
Deleting 1
1. Select with
2. Press , then press
2
The needle moves to the sewing start position.
3. Press .
ESC ESC
4. Select with
5. Input the number of stitches to be deleted,
then press
The example is deleting 1 stitch. Press
46
, then press
so that the
, then press
.
, then press
.
.
1
.
to the
.
.
Programmer