Chapter 2 Programming with Help Function
Adding shunting point before the first stitch
The shunting point is a provisional point provided for prevention of the work clamp interference with impediments
on it when it moves directly from the standby position to the sewing start position.
1
Calling data
1. Press
.
P
The work clamp comes down and the programmer screen is
displayed.
2. Select
with
3. Select
with
4. Input the program number, then press
5. Press
.
ESC
ESC
2
Moving to position 1
1. Select
with
2. Press
, then press
1
The needle moves to the sewing start position.
3. Press
.
ESC
ESC
48
An shunting point is added before the sewing start
position. The example in the left is used for
explanation of setting shunting point A.
, then press
.
, then press
.
, then press
.
.
Programmer
.