Changing The First Stitch Position - Brother BAS-761 Instruction Manual

Chapter 3 Programming with Command Function
5
Ending program
1. Press .
P

Changing the first stitch position

1
Calling data
1. Specify the program number on the operation
panel, then press
Refer to "Using the operation panel of the main body"(page 128)
for detailed operation.
2
Moving to position 1
1. Press , then press
1
The needle moves to the sewing start position.
3
Programming a new point
1. Move the needle with
when the needle point is at 1' of the pattern.
1' is programmed.
4
Deleting 1
1. Press , then press
1
The needle point returns to the first stitch.
2. Press .
C
3. Input the number of stitches to be deleted, then
press .
The example is deleting 1 stitch. Press
96
The position of the sewing start position is changed. The
example in the left is used for explanation of moving the
sewing start position from 1 to 1'.
switch to read the data.
.
. Press
.
.
1
Programmer
L