Creating Feed Data - Brother BAS-761 Instruction Manual

Chapter 3 Programming with Command Function
5.
Create (feed) data of the needle to move the needle from the current position to the next
without dropping it.
Command to be used
1.
2.
3.
108
Repeat steps 3 and 4 and move the needle to the end point. Input
.
1 1 1 E
When the alarm sound is complete, the needle point moves to the end position.
Displays the number of the command input.

Creating feed data

F 7 7 7 L
Move to the point immediately preceding the point to be fed.
Press .
F
Determine the feed point with
Moving in parallel for the feed
Programmer
, then press .
L