Fault Codes - Xerox D125 User Manual

Problem solving
9. Close the front cover completely. The machine will not operate if the front cover is
open even slightly.

Fault codes

Fault code Cause and Remedy
002-770 Cause: Unable to process job template due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
003-750 Cause: Unable to store any documents with 2 Sided Book Copy feature.
Remedy: Check the 2 Sided Book Copy settings.
003-751 Cause: The machine is unable to process size, because the specified document
area is too small.
Remedy: Increase resolution or scan area size.
003-753 Cause: The selected resolution was too large for scanning mixed size originals
using document feeder.
Remedy: Decrease Scan Resolution to 200dpi or less, and rescan.
003-754 Cause: An error occurred in the document scanner.
Remedy: Reprocess the job.
003-755 Cause: An error occurred in the document scanner.
Remedy: Reprocess the job.
003-760 Cause: An incompatible combination of features is specified in the document scan
conditions.
Remedy: Check the selected options.
003-761 Cause: The paper size of the tray selected for auto tray is different from the paper
size of the tray selected for Auto Repeat.
Remedy: Change the paper size for the tray, or change the Paper Type Priority
settings.
003-764 Cause: No document is scanned by Form Overlay.
Remedy: Prepare 2 documents or more.
003-795 Cause: When enlarging/reducing a scanned document to the specified paper size,
the reduction/enlargement ratio value exceeds the allowed range.
Remedy: Take one of the following actions:
Manually enter a reduction/enlargement ratio.
Change the paper size.
005-275 Cause: An error occurred in the document feeder.
005-280 Remedy: Power-cycle the machine. Contact the Customer Support Center.
005-281
005-282
005-283
005-284
10-12 User Guide