Resource Protect mode
The Resource Protect mode protects the resource data such as downloaded fonts and macros and
memorizes the PCL resources even if the emulation mode is switched Off. If you select Permanent,
temporary resources are not protected. If you select Permanent/Temporary, temporary resources
are protected.
1
Access Others, refer to Automatic Form Feed Timeout Setting on page 2-44.
2
Press or to select Resource
Protect and press [Change #].
3
Press [Off], [Permanent], or
[Permanent/Temporary].
4
Press [Close] and returns to the Others screen.
5
Press [Close] and returns to the Printer menu screen.
Auto Error Clear Setting
If an error that still allows you to continue printing occurs, the next received data is automatically
printed after a set period of time elapses. For example, if the printer is shared over a network as a
network printer and one person causes one of the above errors, after the set period of time elapses,
the data sent from the next person is printed. The default setting is Off (Auto Error Clear disabled).
The auto clear errors are:
•
•
You can also set the time that elapses before Auto Continue is activated.
1
Access Others, refer to Automatic Form Feed Timeout Setting on page 2-44.
2
Press or to select Auto Continue
and press [Change #].
3
Press [On] or [Off].
Print overrun Press GO.
Memory overflow Press GO.
Selecting the Printer Settings
Others
Default menu
Setting mode
Form Feed Time Out
30
Seconds
Resource Protect
Permanent
Auto Continue
Off
Finishing Error
Printer menu
Resource Protect
Off
Permanent
Permanent/
Temporary
Printer menu - Others
Others
Default menu
Setting mode
Form Feed Time Out
30
Seconds
Resource Protect
Permanent
Auto Continue
Off
Finishing Error
Printer menu
Change #
Service
Back
Change #
Service
2-45