Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 77

fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1
Identifies the Fx_Port within the module. This number ranges from 1 to the value of
fcFeModulePortCapacity for the associated module. The value remains constant for the identified
Fx_Port until the module is reinitialized.
fcFxPortName 1.3.6.1.2.1.75.1.1.5.1.2
The World Wide Name of this Fx_Port. Each Fx_Port has a unique port World Wide Name within the
fabric.
Return Displays the WWN of the port.
fcFxPortFcphVersionHigh 1.3.6.1.2.1.75.1.1.5.1.3
The highest or most recent version of FC-PH that the Fx_Port is configured to support. This value is
always 32.
fcFxPortFcphVersionLow 1.3.6.1.2.1.75.1.1.5.1.4
The lowest or earliest version of FC-PH that the Fx_Port is configured to support. This value is
always 6,
fcFxPortBbCredit 1.3.6.1.2.1.75.1.1.5.1.5
The total number of receive buffers available for holding Class 1 connect-request, and Class 2 or 3
frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the
attached Nx_Port (if applicable) to Fx_Port.
fcFxPortRxBufSize 1.3.6.1.2.1.75.1.1.5.1.6
The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port.
fcFxPortRatov 1.3.6.1.2.1.75.1.1.5.1.7
The Resource_Allocation_Timeout value configured for the Fx_Port. This is used as the time-out
value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It
represents E_D_TOV (see
maximum time that a frame might be delayed within the fabric and still be delivered.
fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8
The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout value is used as the
time-out value for detecting an error condition.
Fabric OS MIB Reference
53-1000602-01
fcFxPortIndex 1.3.6.1.2.1.75.1.1.5.1.1
"fcFxPortEdtov 1.3.6.1.2.1.75.1.1.5.1.8" on page 59) plus twice the
3
59