Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 47

Brocade fabric os mib reference guide v6.0.0 (53-1000602-01, april 2008)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5
The size of the largest IP datagram that this entity can reassemble from incoming IP fragmented
datagrams received on this interface.
ipRouteTable 1.3.6.1.2.1.4.21
The IP routing table contains an entry for each route currently known to this entity.
ipRouteEntry 1.3.6.1.2.1.4.21.1
A route to a particular destination.
Index
ipRouteDest
ipRouteDest 1.3.6.1.2.1.4.21.1.1
The destination IP address of this route.
An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination
can appear in the table, but access to such multiple entries is dependent on the table-access
mechanisms defined by the network management protocol in use.
ipRouteIfIndex 1.3.6.1.2.1.4.21.1.2
The index value that uniquely identifies the local interface through which the next hop of this route
should be reached.
The interface identified by a particular value of this index is the same interface identified by the
same value of ifIndex.
ipRouteMetric1 1.3.6.1.2.1.4.21.1.3
The primary routing metric for this route.
The semantics of this metric are determined by the routing protocol specified in the route's
ipRouteProto value. If this metric is not used, its value should be set to -1.
ipRouteMetric2 1.3.6.1.2.1.4.21.1.4
An alternate routing metric for this route.
The semantics of this metric are determined by the routing protocol specified in the route's
ipRouteProto value. If this metric is not used, its value should be set to -1.
Fabric OS MIB Reference
53-1000602-01
ipAdEntReasmMaxSize 1.3.6.1.2.1.4.20.1.5
2
29

Advertisement

Table of Contents
loading

Table of Contents