Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 250

8
connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6
connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6
The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node
is a connUnit in the responding SNMP agency, then the value of this object must be equal to its
connUnitID.
ISL: WWN of the remote switch.
Device: Node name of the device.
connUnitLinkPortNumberY 1.3.6.1.3.94.1.12.1.7
The port number on the unit specified by connUnitLinkNodeIdY, if known; otherwise, -1. If the value
is nonnegative then it is equal to connUnitPortPhysicalNumber.
ISL: Physical port number of the remote port.
Device: -1.
connUnitLinkPortWwnY 1.3.6.1.3.94.1.12.1.8
The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16 octets of
binary 0.
ISL: WWN of the remote port.
Device: Port name.
connUnitLinkAgentAddressY 1.3.6.1.3.94.1.12.1.9
The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY, if known;
otherwise, 16 octets of binary 0.
ISL: IP address (IPv4).
Device: 0 (Null).
connUnitLinkAgentAddressTypeY 1.3.6.1.3.94.1.12.1.10
If connUnitLinkAgentAddressY is nonzero, it is a protocol address. ConnUnitLinkAgentAddressTypeY
is the "address family number" assigned by IANA to identify the address format (for example, 1 is
Ipv4, 2 is Ipv6).
ISL: Type 1.
Device: 0 (Null).
connUnitLinkAgentPortY 1.3.6.1.3.94.1.12.1.11
The IP port number for the agent. This is provided in case the agent is at a non-standard SNMP
port.
ISL: IP port.
Device: 0 (Null).
232 Fabric OS MIB Reference
53-1000602-01