Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 292

10
iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4
•
iscsiCxnState is hard coded to value "full"
iscsiCxnAddrType 1.3.6.1.2.1.142.1.1.11.1.1.4
The type of Internet Network Addresses contained in the corresponding instances of
iscsiCxnLocalAddr and iscsiCxnRemoteAddr. The value 'dns' is not allowed.iscsiCxnAddrType is hard
coded to the value ipv4.
iscsiCxnLocalAddr 1.3.6.1.2.1.142.1.1.11.1.1.5
The local Internet Network Address, of the type specified by iscsiCxnAddrType, used by this
connection.
iscsiCxnProtocol 1.3.6.1.2.1.142.1.1.11.1.1.6
The transport protocol over which this connection is running. This is hard coded to tcp (6).
iscsiCxnLocalPort 1.3.6.1.2.1.142.1.1.11.1.1.7
The local transport protocol port used by this connection. This object cannot have the value zero,
since it represents an established connection.This is hard coded to 3260
iscsiCxnRemoteAddr 1.3.6.1.2.1.142.1.1.11.1.1.8
The remote Internet Network Address, of the type specified by iscsiCxnAddrType, used by this
connection.
Only IPv4 addresses are supported.
iscsiCxnRemotePort 1.3.6.1.2.1.142.1.1.11.1.1.9
The remote transport protocol port used by this connection. This object cannot have the value
zero, since it represents an established connection.
iscsiCxnMaxRecvDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.10
The maximum data payload size supported for command or data PDUs able to be received on this
connection.
iscsiCxnMaxXmitDataSegLength 1.3.6.1.2.1.142.1.1.11.1.1.11
The maximum data payload size supported for command or data PDUs able to be sent on this
connection.
274
logout - A valid iSCSI logout command has been sent or received, but the transport protocol
connection has not yet been closed.
Fabric OS MIB Reference
53-1000602-01