Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 253

Brocade fabric os mib reference guide v6.0.0 (53-1000602-01, april 2008)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7
The number of octets or bytes that have been received by this port. There is an one-second periodic
polling of the port. This value is saved and compared with the next polled value to compute net
throughput.
For Fibre Channel, ordered sets are not included in the count.
connUnitPortStatCountBBCreditZero 1.3.6.1.3.94.4.5.1.8
The number of transitions in/out of BB credit zero state. The other side is not providing any credit.
This is a Fibre Channel statistic only.
connUnitPortStatCountInputBuffersFull 1.3.6.1.3.94.4.5.1.9
Supported.
The number of occurrences when all input buffers of a port were full and outbound buffer-to-buffer
credit transitioned to 0. There is no credit to provide to other side.
Return Value: 80 0 0 0 0 0 0 0 (Not Supported)
This is a Fibre Channel statistic only.
connUnitPortStatCountFBSYFrames 1.3.6.1.3.94.4.5.1.10
The number of times that FBSY was returned to this port as a result of a frame that could not be
delivered to the other end of the link. This occurs if either the Fabric or the destination port is
temporarily busy. Port can only occur on SOFc1 frames (the frames that establish a connection).
This is a Fibre Channel only statistic. This is the sum of all classes. If you cannot keep the by-class
counters, then keep the sum counters.
connUnitPortStatCountPBSYFrames 1.3.6.1.3.94.4.5.1.11
Supported.
The number of times that PBSY was returned to this port as a result of a frame that could not be
delivered to the other end of the link. This occurs if the destination port is temporarily busy. PBSY
can only occur on SOFc1 frames (the frames that establish a connection).
Return Value: 80 0 0 0 0 0 0 0 (not supported)
This is a Fibre Channel only statistic. This is the sum of all classes. If you cannot keep the by class
counters, then keep the sum counters.
connUnitPortStatCountFRJTFrames 1.3.6.1.3.94.4.5.1.12
The number of times that FRJT was returned to this port as a result of a frame that was rejected by
the fabric.
Fabric OS MIB Reference
53-1000602-01
connUnitPortStatCountRxElements 1.3.6.1.3.94.4.5.1.7
8
235

Advertisement

Table of Contents
loading

Table of Contents