Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 236

8
connUnitPortTable 1.3.6.1.3.94.1.10
The following mapping is for each individual sensor, where applicable:
swSensorType
1 (temperature)
2 (fan)
3 (power supply)
Values Possible values are:
•
•
•
•
•
•
•
•
•
•
connUnitPortTable 1.3.6.1.3.94.1.10
Generic information on ports for a specific connUnit
NOTE
Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported.
connUnitPortEntry 1.3.6.1.3.94.1.10.1
Each entry contains the information for a specific port.
Index connUnitPortUnitId
connUnitPortIndex
connUnitPortUnitId 1.3.6.1.3.94.1.10.1.1
The connUnitId value of the connectivity unit that contains this port.
Same value as connUnitId.
connUnitPortIndex 1.3.6.1.3.94.1.10.1.2
Number of physical ports between 0 and maximum number of system supported ports in the
connectivity unit (internal/embedded, external).
218
connUnitSensorCharacteristic
3 (temperature)
7 (airflow)
9 (power)
unknown (1)
other (2)
temperature (3)
pressure (4)
emf (5)
currentValue (6) Current is a keyword.
airflow (7)
frequency (8)
power (9)
door (10) Not supported in Fabric OS v2.6.1.
Fabric OS MIB Reference
53-1000602-01