Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 249

A Brocade Access Gateway has no ISLs (InterSwitch Links); therefore all F_Port and N_Port
connections display in ag --show for online F_Ports.
connUnitLinkEntry 1.3.6.1.3.94.1.12.1
An entry describing a particular link to another.
Index connUnitLinkUnitId
connUnitLinkIndex
connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1
The connUnitId of the connectivity unit that contains this link table.
Values Set to WWN of the local switch.
connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2
This value is used to create a unique value for each entry in the link table with the same
connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the
next candidate to be used. This value is allowed to wrap at the highest value represented by the
number of bits. This value is reset to 0 when the system is reset and the first value to be used is 1.
Indexes 1 through maximum number of ports is reserved for ISL.
Indexes maximum number of ports + 1 and above are reserved for end devices and are calculated
based on portID of the end device(s).
connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3
The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a
connUnit in the responding agent, then the value of this object must be equal to its connUnitID.
WWN of the local switch.
connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4
The port number on the unit specified by connUnitLinkNodeIdX, if known; otherwise, -1. If the value
is nonnegative, then it is equal to connUnitPortPhysicalNumber.
ISL: Physical port number of the E_Port.
Device: Physical port # to which the device is connected.
connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5
The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16 octets of
binary 0.
This is the WWN of the port to which the device is connected.
Fabric OS MIB Reference
53-1000602-01
connUnitLinkEntry 1.3.6.1.3.94.1.12.1
8
231