Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 244

8
connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20
This contains the OID of the first object of the table that contains the statistics for this particular
port. If this has a value of 0, then there are no statistics available for this port. The port type
information helps identify the statistics objects found in the table. From this point, use the getnext
command to get the next statistics object. When the first part of the OID changes, the end of table
is reached.
Mapped to connUnitPortStatFabricUnitId.
connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20
Not supported in Fabric OS v2.6.1.
This is the bit mask that specifies the driver-level protocol capability of this port.
If this is not applicable, return all bits set to 0.
Return value = 07F
The bits have the following definition:
•
•
•
•
•
•
•
connUnitPortProtocolOp 1.3.6.1.3.94.1.10.1.21
Not supported in Fabric OS v2.6.1.Supported in v5.x, v6.0.
This is the bit mask that specifies the driver level protocol(s) that are currently operational.
Return value = 07F
If this is not applicable, return all bits set to zero. The bits have the following definition:
•
•
•
•
•
•
•
connUnitPortNodeWwn 1.3.6.1.3.94.1.10.1.22
Not supported in Fabric OS v2.6.1. Supported in v5.x, v6.0.
The node World Wide Name of the port, if applicable; otherwise, an empty string.
226
0 = unknown
1 = Loop
2 = Fabric
4 = SCSI
8 = TCP/IP
16 = VI
32 = FICON
0 = unknown
1 = Loop
2 = Fabric
4 = SCSI
8 = TCP/IP
16 = VI
32 = FICON
Fabric OS MIB Reference
53-1000602-01