Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 239

For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing,
faulted).
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7
An overall protocol status for the port. For a U_Port, the status should be ols (9).
Values Possible values are:
•
•
•
•
•
•
•
•
•
NOTE
In FOS v2.6.x, for an E_Port, F_Port, or FL_Port, the value is 3 (ok). For a U_Port, the value is 2
(unused) if not faulty with GBIC, 1(unknown) if not faulty but no GBIC, or 5 (failure) if faulty.
In FOS v3.x and above, for an E_Port, F_Port, FL_Port or other Port and online port state, the value
is 3 (ok). For G_Port or other Port and offline port state, the value is 9 (ols). For unknown portype
and offline port state, the value is 1 (unknown).
connUnitPortTransmitterType 1.3.6.1.3.94.1.10.1.8
The technology of the port transceiver.
Values Possible values are:
•
•
•
•
•
•
•
•
•
•
•
Fabric OS MIB Reference
53-1000602-01
unknown (1)
unused (2) Device cannot report this status.
ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed.
warning (4) Do not use.
failure (5) Port is faulty.
notparticipating (6) Loop not participating and does not have a loop address. Do not use.
initializing (7) Protocol is proceeding. Do not use.
bypass (8) Do not use.
ols (9) FCP offline status. (Not supported in Fabric OS v2.6.1.)
unknown (1)
other (2)
unused (3)
shortwave (4)
longwave (5)
copper (6)
scsi (7)
longwaveNoOFC (8)
shortwaveNoOFC (9)
longwaveLED (10)
ssa (11) (Not supported in Fabric OS v2.6.1.)
connUnitPortStatus 1.3.6.1.3.94.1.10.1.7
8
221