Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 191

swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1
This object identifies the port number of the switch.
swBlmPerfEERefKey 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.2
This object identifies the reference number of the counter. This reference is a number assigned
when a filter is created. In the SNMP Index, start with one instead of 0, add one to the actual
reference key.
swBlmPerfEECRC 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.3
End-to-end CRC error for the frames that matched the SID-DID pair.
swBlmPerfEEFCWRx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.4
Get end-to-end count of Fibre Channel words (FCW) received by the port that matched the SID-DID
pair.
swBlmPerfEEFCWTx 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.5
Get end-to-end count of Fibre Channel words (FCW) transmitted by the port that matched the
SID-DID pair.
swBlmPerfEESid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.6
Gets DID information by reference number.
swBlmPerfEEDid 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.7
Gets SID information by reference number. SID (Source Identifier) is a 3-byte field in the frame
header used to indicate the address identifier of the N_Port from which the frame was sent.
swBlmPerfFltMntTable 1.3.6.1.4.1.1588.2.1.1.1.23.3
Filter-based monitoring counter.
swBlmPerfFltMntEntry 1.3.6.1.4.1.1588.2.1.1.1.23.3.1
Filter-based monitoring counter for given port.
Index swBlmPerfFltPort, swBlmPerfFltRefkey
Fabric OS MIB Reference
53-1000602-01
swBlmPerfEEPort 1.3.6.1.4.1.1588.2.1.1.1.23.2.1.1
5
173