Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 173

swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29
Counts the number of multicast frames that have been timed out.
swFCPortTxMcasts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30
Counts the number of multicast frames that have been transmitted.
swFCPortLipIns 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31
Counts the number of loop initializations that have been initiated by loop devices attached.
swFCPortLipOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32
Counts the number of loop initializations that have been initiated by the port.
swFCPortLipLastAlpa 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33
Indicates the physical address (AL_PA) of the loop device that initiated the last loop initialization.
swFCPortWwn 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34
The WWN of the Fibre Channel port. The contents of an instance are in IEEE extended format, as
specified in FC-PH.
swFCPortSpeed 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35
The desired baud rate for the port.
Values The baud rate can be 1 Gbit/sec, 2 Gbit/sec, autonegotiate, or 4 Gbit/sec or 8 Gbit/sec. 4 Gbit/sec
is only applicable to the Brocade 4100, 4900, 7500, 7600, and 48000.8 Gbit/sec is only
applicable to the Brocade DCX director.
swFCPortName 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36
Supported in Fabric OS v4.1.x and later. A string that indicates the name of the addressed port.
NOTE
The names should be persistent across switch reboots. Port names do not have to be unique within
a switch or within a fabric.
Fabric OS MIB Reference
53-1000602-01
swFCPortMcastTimedOuts 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29
5
155