Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 169

swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1
The switch port index.
Values The physical port number of the switch, plus 1.
The valid values for the Brocade 12000, 24000, and 48000 directors are 0 through maximum
number of ports.
swFCPortType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2
The type of ASIC for the switch port.
Values Possible values are:
•
•
•
•
•
•
•
•
swFCPortPhyState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3
The physical state of the port.
Values Possible values are:
•
•
•
•
•
•
•
•
•
Fabric OS MIB Reference
53-1000602-01
stitch (1)
flannel (2)
loom (3) (Brocade 2000 series)
bloom (4) (Valid value for Brocade 3250, 3850, 3900, 12000, 24000)
rdbloom (5)
wormhole (6)
other (7) (Valid value for Brocade 200E, 4012, 4100, 4900, 7500, 7600, and 48000)
unknown (8)
noCard (1) No card is present in this switch slot.
noTransceiver (2) No Transceiver module in this port (Transceiver is the generic name for GBIC,
SFP, and so on).
laserFault (3) The module is signaling a laser fault (defective GBIC).
noLight (4) The module is not receiving light.
noSync (5) The module is receiving light but is out of sync.
inSync (6) The module is receiving light and is in sync.
portFault (7) The port is marked faulty (defective GBIC, cable, or device).
diagFault (8) The port failed diagnostics (defective G_Port or FL_Port card or motherboard).
lockRef (9) Port is locking to the reference signal.
swFCPortIndex 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1
5
151