Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 283

Not supported.
iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9
The maximum length in bytes supported for unsolicited data to/from this node.
Not supported.
iscsiNodeMaxBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.10
The maximum number of bytes that can be sent within a single sequence of data-in or data-out
PDUs.
Not supported.
iscsiNodeMaxConnections 1.3.6.1.2.1.142.1.1.5.1.1.11
The maximum number of connections allowed in each session to and/or from this node.
Supported. Hard coded to 2.
iscsiNodeDataSequenceInOrder 1.3.6.1.2.1.142.1.1.5.1.1.12
The preference for the order of transfer for iSCSI data PDU sequences. False (NO) indicates that
PDU sequences may be transferred in any order. True (YES) indicates that data PDU sequences
must be transferred using continuously increasing offsets, except during error recovery.
Not supported.
iscsiNodeDataPDUInOrder 1.3.6.1.2.1.142.1.1.5.1.1.13
The preference for the order of iSCSI data PDUs within iSCSI data PDU sequences. False (NO)
indicates that data PDUs may be transferred in any order within a sequence. True (YES) indicates
that data PDUs must be transferred using continuously increasing addresses within a sequence,
with no gaps or overlay between PDUs.
Not supported.
iscsiNodeDefaultTime2Wait 1.3.6.1.2.1.142.1.1.5.1.1.14
The minimum time, in seconds, to wait before attempting an explicit/implicit logout or active iSCSI
task reassignment after an unexpected connection termination or a connection reset.
Not supported.
iscsiNodeDefaultTime2Retain 1.3.6.1.2.1.142.1.1.5.1.1.15
The minimum time, in seconds, to wait, after an initial wait (Time2Wait), for a possible active iSCSI
task reassignment after an unexpected connection termination or a connection reset.
Fabric OS MIB Reference
53-1000602-01
iscsiNodeFirstBurstLength 1.3.6.1.2.1.142.1.1.5.1.1.9
10
265