Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 229

connUnitUpTime 1.3.6.1.3.94.1.6.1.9
The number of centiseconds since the last unit initialization.
Set when connUnitTable is initialized.
connUnitUrl 1.3.6.1.3.94.1.6.1.10
URL to launch a management application, if applicable; otherwise an empty string. In a standalone
unit, this would be the same as the top-level URL. This has the same definition as systemURL for
keywords.
(Same as systemURL.) The expected value for connUnitURL.0 is:
"http://{a.b.c.d}"
where {a.b.c.d} is the IP address of the switch if Web Tools license is available.
"" (null)
where "" is the IP address of the switch if Web Tools license is not available.
connUnitDomainId 1.3.6.1.3.94.1.6.1.11
24-bit Fibre Channel address ID of this connectivity unit, right-justified with leading 0s if required. If
this value is not applicable, return all bits to 1.
Set to the switch domain ID (as per FC-SW).
For a Brocade Access Gateway device, the value is hard coded as "11 11 11". A Brocade Access
Gateway does not have a domain ID.
connUnitProxyMaster 1.3.6.1.3.94.1.6.1.12
A value of "yes" means this is the proxy master unit for a set of managed units.
Values Possible values are:
•
•
•
This could be the only unit with a management card in it for a set of units. A standalone unit should
return "yes" for this object.
Set to 3 (yes).
connUnitPrincipal 1.3.6.1.3.94.1.6.1.13
Indicates whether this connectivity unit is the principal unit within the group of fabric elements. If
this value is not applicable, it returns "unknown."
Fabric OS MIB Reference
53-1000602-01
unknown (1)
no (2)
yes (3)
connUnitUpTime 1.3.6.1.3.94.1.6.1.9
8
211