Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 151

#SEVERITY
#TIMEINDEX
#STATE
Sample trap output for Fabric OS 4.4.0:
swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4
Enterprise sw
Variables "swEventIndex 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1"
"swEventTimeInfo 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2"
"swEventLevel 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3"
"swEventRepeatCount 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4"
"swEventDescr 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5"
"swSsn 1.3.6.1.4.1.1588.2.1.1.1.1.10"
This trap is generated when an event occurs with a level that is at or below
1.3.6.1.4.1.1588.2.1.1.1.8.1".
#TYPE
#SUMMARY
#ARGUMENTS
#SEVERITY
#TIMEINDEX
#STATE
Each Trap recipient has a configured severity level association. Whenever an error message is
generated at or above that configured severity level the recipient is notified of the event.
This trap is generated for all RASLog messages. From Fabric OS 4.4.0 this trap is only generated for
external RASLog messages.
Sample trap output for Fabric OS 4.4.0:
To get more details on any particular event, see the Fabric OS System Error Message Reference.
Fabric OS MIB Reference
53-1000602-01
Informational
1
Operational
swFCPortOpStatus.11 = offline(2)
swFCPortIndex.11 = 11
swFCPortName.11 = test
swSsn.0 = none
A firmware event has been logged.
Event %d: %s (severity level %d) - %s SSN is #%s
0, 1, 2, 4, 5
Informational
1
Operational
swEventIndex.39 = 39
swEventTimeInfo.39 = 2004/08/10-07:00:17
swEventLevel.39 = warning (3)
swEventRepeatCount.39 = 1
swEventDescr.39 = SULB-1001 Firmwaredownload command
has started.
swSsn.0 = none
swEventTrap 1.3.6.1.4.1.1588.2.1.1.1.0.4
5
"swEventTrapLevel
133