Trunking Group - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

5
swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1
swBlmPerfFltPort 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.1
This object identifies the port number of the switch.
swBlmPerfFltRefkey 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.2
This object identifies the reference number of the filter. This reference number is assigned when a
filter is created. In the SNMP Index, start with one instead of 0, add one to actual reference key.
swBlmPerfFltCnt 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.3
Get statistics of filter-based monitor. Filter-based monitoring provides information about a filter hit
count, such as:
•
•
•
swBlmPerfFltAlias 1.3.6.1.4.1.1588.2.1.1.1.23.3.1.4
Alias name for the filter.

Trunking Group

swSwitchTrunkable 1.3.6.1.4.1.1588.2.1.1.1.24.1
Whether the switch supports the trunking feature or not: no (0) or yes (8).
swTrunkTable 1.3.6.1.4.1.1588.2.1.1.1.24.2
Displays trunking information for the switch.
For the Brocade 4100, cc ports per trunk are supported.
swTrunkEntry 1.3.6.1.4.1.1588.2.1.1.1.24.2.1
Entry for the trunking table.
Index swTrunkPortIndex
swTrunkPortIndex 1.3.6.1.4.1.1588.2.1.1.1.24.2.1.1
This object identifies the switch port index.
174
Read command
SCSI or IP traffic
SCSI Read/Write
Fabric OS MIB Reference
53-1000602-01