Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 232

8
connUnitContact 1.3.6.1.3.94.1.6.1.23
•
•
•
connUnitContact 1.3.6.1.3.94.1.6.1.23
Contact information for this connectivity unit.
Displays the same value as sysContact. Changing the value in this variable causes the value in
sysContact to also be changed.
connUnitLocation 1.3.6.1.3.94.1.6.1.24
Location information for this connectivity unit.
Displays the same value as sysLocation.
connUnitEventFilter 1.3.6.1.3.94.1.6.1.25
Defines the event severity logged by this connectivity unit. All events of severity less than or equal
to connUnitEventFilter are logged in connUnitEventTable.
Return Always returns value 9 (debug).
connUnitNumEvents 1.3.6.1.3.94.1.6.1.26
Number of events currently in connUnitEventTable.
Values For Fabric OS v3.0 this value ranges from 0 to 64.
For Fabric OS v4.0 this value ranges from 0 to 255.
For Fabric OS v4.2 this value ranges from 0 to 2048.
For Fabric OS v4.4 this value ranges from 0 to 1024.
For Fabric OS v5.0.1 this value ranges from 0 to 1024.
connUnitMaxEvents 1.3.6.1.3.94.1.6.1.27
Maximum number of events that can be defined in connUnitEventTable.
Values For Fabric OS v3.0 this value is 64.
For Fabric OS v4.0 this value is 255.
For Fabric OS v4.2 this value is 2048.
214
resetConnUnitWarmStart (4): Fastboot. The addressed unit performs a Warm Start reset.
offlineConnUnit (5): Disable switch. The addressed unit puts itself into an
implementation-dependant offline state. In general, if a unit is in an offline state, it cannot be
used to perform meaningful Fibre Channel work.
onlineConnUnit (6): Enable switch. The addressed unit puts itself into an
implementation-dependant online state. In general, if a unit is in an online state, it is capable
of performing meaningful Fibre Channel work.
Fabric OS MIB Reference
53-1000602-01