Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 238

8
connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4
•
•
•
•
connUnitPortFCClassCap 1.3.6.1.3.94.1.10.1.4
Bit mask that specifies the classes of service capability of this port. If this is not applicable, return
all bits set to 0.
The bits have the following definition:
•
•
•
•
•
•
•
•
For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D.
For a Brocade Access Gateway, both the F_Port and N_Port this value is 0x0008. An Access
Gateway supports class-three services only, therefore the value is 8 for both port types.
connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5
Bit mask that specifies the classes of service that are currently operational. If this is not applicable,
return all bits set to 0. This object has the same definition as connUnitPortFCClassCap.
For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D.
For a Brocade Access Gateway both the F_Port and N_Port this value is 0x0008. A Brocade Access
Gateway supports class-three services only, therefore the value is 8 for both port types.
connUnitPortState 1.3.6.1.3.94.1.10.1.6
The state of the port hardware.
Values Possible values are:
•
•
•
•
•
220
wan (16)
ac (17) AC power line. (Not supported in Fabric OS v2.6.1.)
dc (18) DC power line. (Not supported in Fabric OS v2.6.1)
ssa (19) Serial storage architecture. (Not supported in Fabric OS v2.6.1.)
unknown 0
class-f 1
class-one 2
class-two 4
class-three 8
class-four 16
class-five 32
class-six 64
unavailable (1) Do not use.
online (2) Available for meaningful work.
offline (3) Not available for meaningful work.
bypassed (4) No longer used.
diagnostics (5) Map to your testing. (Not supported in Fabric OS v2.6.1.)
Fabric OS MIB Reference
53-1000602-01