Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 128

4
entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5
For agents not accessible through SNMPvl or SNMPv2C, the value of this object is the empty string.
This object might also contain an empty string if a community string has not yet been assigned by
the agent, or no community string with suitable access rights can be returned for a particular
SNMP request.
Note that this object is deprecated. Agents that implement SNMPv3 access should use the
entLogicalContextEngineID and entLogicalContextName objects to identify the context associated
with each logical entity. SNMPv3 agents might return a zero-length string for this object or might
continue to return a community string (for example, tri-lingual agent support).
entLogicalTAddress 1.3.6.1.2.1.47.1.2.1.1.5
The transport service address by which the logical entity receives network management traffic,
formatted according to the corresponding value of entLogicalTDomain.
For snmpUDPDomain, a TAddress is 6 octets long, the initial 4 octets containing the IP-address in
network-byte order and the last 2 containing the UDP port in network-byte order. Refer to Transport
Mappings for Version 2 of the Simple Network Management Protocol (RFC1906) for further
information on snmpUDPDomain.
entLogicalTDomain 1.3.6.1.2.1.47.1.2.1.1.6
Indicates the kind of transport service by which the logical entity receives network management
traffic. Possible values for this object are currently found in the Transport Mappings for SNMPv2
document (RFC1906).
entLogicalContextEngineID 1.3.6.1.2.1.47.1.2.1.1.7
The authoritative contextEngineID that can be used to send an SNMP message concerning
information held by this logical entity to the address specified by the associated
entLogicalTAddress/entLogicalTDomain pair.
This object, together with the associated entLogicalContextName object, defines the context
associated with a particular logical entity; it allows access to SNMP engines identified by a
contextEngineId and contextName pair.
If no value has been configured by the agent, a zero-length string is returned, or the agent might
choose not to instantiate this object at all.
entLogicalContextName 1.3.6.1.2.1.47.1.2.1.1.8
The contextName that can be used to send an SNMP message concerning information held by this
logical entity to the address specified by the associated entLogicalTAddress/entLogicalTDomain
pair.
This object, together with the associated entLogicalContextEngineID object, defines the context
associated with a particular logical entity and allows access to SNMP engines identified by a
contextEngineId and contextName pair.
If no value has been configured by the agent, a zero-length string is returned, or the agent might
choose not to instantiate this object at all.
110 Fabric OS MIB Reference
53-1000602-01