Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual page 40

2
ifPhysAddress 1.3.6.1.2.1.2.2.1.6
ifPhysAddress 1.3.6.1.2.1.2.2.1.6
The interface's address at the protocol layer immediately below the network layer in the protocol
stack.
Values For interfaces that do not have such an address (for example, a serial line), this object should
contain an octet string of zero length.
•
•
•
ifAdminStatus 1.3.6.1.2.1.2.2.1.7
The desired state of the interface.
NOTE
The 3 state (testing) indicates that no operational packets can be passed. This object is read-only in
Fabric OS v4.x and above.
ifOperStatus 1.3.6.1.2.1.2.2.1.8
The current operational state of the interface.
NOTE
The 3 state (testing) indicates that no operational packets can be passed.
ifLastChange 1.3.6.1.2.1.2.2.1.9
The value of sysUpTime at the time the interface entered its current operational state. If the current
state was entered prior to the last re-initialization of the local network management subsystem,
then this object contains a zero value.
ifInOctets 1.3.6.1.2.1.2.2.1.10
The total number of octets received on the interface, including framing characters.
ifInUcastPkts 1.3.6.1.2.1.2.2.1.11
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
Not supported.
22
eth0 returns the MAC address of the Ethernet
lo returns null
fc0 returns the MAC address of the Fibre Channel
Fabric OS MIB Reference
53-1000602-01