Interpreting Led Activity - HP AA979A - StorageWorks SAN Switch 2/8V Installation Manual

Interpreting LED Activity

System activity and status can be determined through the activity of the LEDs on
the switch.
There are three possible LED states: no light, a steady light, and a flashing light.
The steady lights and flashing lights can be green or amber.
The LEDs flash any of these colors during boot, POST, or other diagnostic tests.
This is normal and does not indicate a problem unless the LEDs do not indicate a
healthy state after all boot processes and diagnostic tests are complete. A healthy
state is indicated by a steady green light. See
LED activity.
SAN Switch 2/8V, 2/16V and 2/16N Installation Guide
Managing the SAN Switches
Table 10 on page 62 for details about
59