Installing the SAN Switch 2/8
6. Insert the switch with the attached inner rails into the outer rails.
Note:
comparable EIA rack.
Figure 21: Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
54
This step applies to both the HP System/e rack and the HP 9000 Series or
Insert the switch into the rack and install (2) #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers with one on each side.
Figure 21
and
Figure
22.
SAN Switch 2/8 Version 3.1.x Installation Guide
See