Installing The Switch In A Rack Using The San Switch Rack Mount Kit; San Switch Rack Mount Kit Rails And Rail Mounting Hardware - HP StorageWorks 2/16 - SAN Switch Installation Manual

Installing the SAN Switch 2/16

Installing the Switch in a Rack Using the SAN Switch Rack Mount Kit

This section provides instructions for installing the switch in an HP System/e
cabinet, or in an HP 10000 series cabinet using the HP StorageWorks SAN Switch
Rack Mount Kit supplied with your switch. The Rack Mount Kit installation
requires one technician to install a SAN Switch.
The following items are required to install the switch in a cabinet:
The SAN Switch Rack Mount Kit rails and rail mounting hardware are shown in
Table
Table 4: SAN Switch Rack Mount Kit rails and rail mounting hardware
Item
26
SAN Switch 2/16
Power cables
#2 Phillips screwdriver
7/16-inch wrench or socket
4:
(2) Rear mounting bracket
A right inner rail and a right outer rail
A left inner rail and a left outer rail
Description
SAN Switch 2/16 Version 3.1.2 Installation Guide