Acl Port Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

Gigabit Link Configuration commands
Table 98
Command
no flowcontrol
[no] auto
show interface port
{<port number>}

ACL Port configuration

The following table describes the basic Access Control List Configuration commands for the port.
ACL Port Configuration commands
Table 99
Command
[no] access-control list <1-384>
[no] access-control group <1-384>
show interface port [<port number>]
access-control
Description
Sets the flow control to none.
Command mode: Interface port
Enables or disables auto-negotiation for the port.
All downlink and uplink ports are fixed at 10000 Mbps, and cannot be
set to auto-negotiate.
Command mode: Interface port
Displays current port parameters.
Command mode: All
Description
Adds or removes the specified ACL.
Command mode: Interface port
Adds or removes the specified ACL Group.
Command mode: Interface port
Displays current ACL QoS parameters.
Command mode: All
Configuration Commands
125