Igmp Mrouter Maintenance; Uuencode Flash Dump - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

IGMP Snooping Maintenance commands
Table 184
Command
show ip igmp groups interface <port number>
show ip igmp groups
clear ip igmp snoop

IGMP Mrouter maintenance

The following table describes the IGMP Multicast Routers Maintenance commands.
IGMP Multicast Group Maintenance commands
Table 185
Command
show ip igmp mrouter vlan <1-4094>
show ip igmp mrouter
clear ip igmp mrouter

Uuencode flash dump

show flash-dump-uuencode
Command mode: All
Using this command, dump information is presented in uuencoded format. This format makes it easy to
capture the dump information as a file or a string of characters.
If you want to capture dump information to a file, set your communication software on your workstation to
capture session data prior to issuing the command. This will ensure that you do not lose any information.
Once entered, the command will cause approximately 23,300 lines of data to be displayed on your
screen and copied into the file.
Using the above command, dump information can be read multiple times. The command does not cause
the information to be updated or cleared from flash memory.
Dump information is not cleared automatically. In order for any subsequent dump information to be
written to flash memory, you must manually clear the dump region. For more information on clearing the
dump region, see the "Clearing dump information" section later in this chapter.
Maintenance Commands
Usage
Shows IGMP Multicast groups on a single port.
Command mode: All except User EXEC
Shows all IGMP Multicast groups.
Command mode: All except User EXEC
Clears IGMP Multicast data from switch memory.
Command mode: All except User EXEC
Usage
Shows IGMP Multicast groups on a single VLAN.
Command mode: All except User EXEC
Shows all IGMP Multicast routers.
Command mode: All except User EXEC
Clears IGMP Multicast router data from switch memory.
Command mode: All except User EXEC
195