Snmpv3 Target Address Table Information; Snmpv3 Target Parameters Table Information - HP 445860-B21 - 10Gb Ethernet BL-c Switch Reference Manual

SNMPv3 Target Address Table information

The following command displays SNMPv3 target address information:
show snmp-server v3 target-address
Command mode: All
Name
---------- --------------- ---- ---------- ---------------
trap1
This command displays the SNMPv3 target address table information, which is stored in the SNMP
engine.
The following table describes the SNMPv3 Target Address Table information.
Target Address Table information
Table 14
Field
Name
Transport Addr
Port
Taglist
Params

SNMPv3 Target Parameters Table information

The following command displays SNMPv3 target parameters information:
show snmp-server v3 target-parameters
Command mode: All
Name
------------------- -------- -------------------- --------- -----------
v1v2param
The following table describes the SNMPv3 Target Parameters Table information.
Target Parameters Table information
Table 15
Field
Name
MP Model
User Name
Transport Addr
47.81.25.66
Description
Displays the locally arbitrary, but unique identifier associated with this
snmpTargetAddrEntry.
Displays the transport addresses.
Displays the SNMP UDP port number.
This column contains a list of tag values which are used to select target addresses for
a particular SNMP message.
The value of this object identifies an entry in the snmpTargetParamsTable. The
identified entry contains SNMP parameters to be used when generating messages to
be sent to this transport address.
MP Model User Name
snmpv2c
Description
Displays the locally arbitrary, but unique identifier associated with this
snmpTargeParamsEntry.
Displays the Message Processing Model used when generating SNMP messages using this entry.
Displays the securityName, which identifies the entry on whose behalf SNMP messages will be
generated using this entry.
Port Taglist Params
162 v1v2trap v1v2param
v1v2only
Information Commands
Sec Model Sec Level
snmpv1 noAuthNoPriv
25