Download  Print this page

Verifying Ospf Configuration - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual

Hp 1:10gb ethernet bl-c switch for c-class bladesystem application guide.
Hide thumbs


Configure route summarization by specifying the starting address and mask of the range of
addresses to be summarized.
>> OSPF Interface 2 # ../range 1 (Select menu for summary range)
>> OSPF Summary Range 1 # addr (Set base IP address
>> OSPF Summary Range 1 # mask mask address
>> OSPF Summary Range 1 # aindex 0 (Inject summary route into backbone)
>> OSPF Summary Range 1 # enable
Use the hide command to prevent a range of addresses from advertising to the backbone.
>> OSPF Interface 2 # ../range 2
>> OSPF Summary Range 2 # addr
>> OSPF Summary Range 2 # mask
>> OSPF Summary Range 2 # hide enable
Apply and save the configuration changes.
>> OSPF Summary Range 2 # apply
>> OSPF Summary Range 2 # save

Verifying OSPF configuration

Use the following commands to verify the OSPF configuration on your switch:
See the HP c-Class 1:10Gb Ethernet Blade Switch Command Reference Guide for information on the
above commands.
of summary range)
for summary range)
(Enable summary range)
(Select menu for summary range)
(Set base IP address)
(Set mask address)
(Hide the range of addresses)
(Apply all changes)
(Save all changes)


Table of Contents

   Related Manuals for HP 438031-B21 - 1:10Gb Ethernet BL-c Switch

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: