Port-Based Network Access And Traffic Control; Port-Based Network Access Control; Extensible Authentication Protocol Over Lan - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual

Port-based Network Access and traffic control

Port-based Network Access control

Port-based Network Access control provides a means of authenticating and authorizing devices attached
to a LAN port that has point-to-point connection characteristics. It prevents access to ports that fail
authentication and authorization. This feature provides security to all ports of the HP 1:10GbE switch
(except the management port 18).
The following topics are discussed in this section:

Extensible Authentication Protocol over LAN

802.1x Authentication Process
802.1x Port States
Supported RADIUS Attributes
Configuration Guidelines
Extensible authentication protocol over LAN
HP 1:10GbE switch software can provide user-level security for its ports using the IEEE 802.1x protocol,
which is a more secure alternative to other methods of port-based network access control. Any device
attached to an 802.1x-enabled port that fails authentication is prevented access to the network and
denied services offered through that port.
The 802.1x standard describes port-based network access control using Extensible Authentication
Protocol over LAN (EAPoL). EAPoL provides a means of authenticating and authorizing devices attached
to a LAN port that has point-to-point connection characteristics and of preventing access to that port in
cases of authentication and authorization failures.
EAPoL is a client-server protocol that has the following components:
Supplicant or Client—The Supplicant is a device that requests network access and provides the
required credentials (user name and password) to the Authenticator and the Authentication Server.
Authenticator—The Authenticator enforces authentication and controls access to the network. The
Authenticator grants network access based on the information provided by the Supplicant and the
response from the Authentication Server. The Authenticator acts as an intermediary between the
Supplicant and the Authentication Server: requesting identity information from the client, forwarding
that information (encapsulated in RADIUS packets) to the Authentication Server for validation,
relaying the server's responses to the client, and authorizing network access based on the results of
the authentication exchange. The HP 1:10GbE switch acts as an Authenticator.
Authentication Server—The Authentication Server validates the credentials provided by the
Supplicant to determine if the Authenticator should grant access to the network. The Authentication
Server may be co-located with the Authenticator. The switch relies on external RADIUS servers for
authentication.
Upon a successful authentication of the client by the server, the 802.1x-controlled port transitions from
unauthorized to authorized state, and the client is allowed full access to services through the port. When
the client sends an EAP-Logoff message to the authenticator, the port will transition from authorized to
unauthorized state.
Port-based Network Access and traffic control
46