HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual page 18

3. Configure an entry in the notify table.
/c/sys/ssnmp/snmpv3/notify 10
name v1trap
tag v1trap
4.
Specify the IP address and other trap parameters in the Target Address( targetAddr) and Target
Parameters (targetParam) tables. Use the following command to specify the user name used with this
targetParam table:
c/sys/ssnmp/snmpv3/tparam <x>/uname
/c/sys/ssnmp/snmpv3/taddr 10
name v1trap
addr 47.80.23.245
taglist v1trap
pname v1param
/c/sys/ssnmp/snmpv3/tparam 10
name v1param
mpmodel snmpv1
uname v1trap
model snmpv1
5.
Use the community table to define the community string used in the traps.
/c/sys/ssnmp/snmpv3/comm 10
index v1trap
name public
uname v1trap
(Assign user to the notify table)
(Define an IP address to send traps)
(Specify SNMPv1 traps to send)
(Define the community string)
Accessing the switch
18