Download  Print this page

Setting Up User Ids - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual

Hp 1:10gb ethernet bl-c switch for c-class bladesystem application guide.
Hide thumbs

Advertisement

Setting up user IDs

The administrator can configure up to 10 user accounts.
To configure an end-user account, perform the following steps:
1.
Select a user ID to define.
>> # /cfg/sys/access/user/uid 1
2.
Define the user name and password.
>> User ID 1 # name jane
Current user name:
New user name: jane
3.
Define the user access level. By default, the end user is assigned to the user access level. To change
the user's access level, enter the user Class of Service (cos) command, and select one of the
available options.
>> User ID 1 # cos <user|oper|admin>
4.
Enable the user ID.
>> # /cfg/sys/access/user/uid <#>/ena
Once an end user account is configured and enabled, the user can login to the switch using the
username/password combination. The level of switch access is determined by the user CoS for the
account. The CoS corresponds to the user access levels described in the User access levels table.
Accessing the switch
(Assign name "jane" to user ID 1)
35

Advertisement

Table of Contents

   Related Manuals for HP 438031-B21 - 1:10Gb Ethernet BL-c Switch

This manual is also suitable for:

1:10gbe

Comments to this Manuals

Symbols: 0
Latest comments: