Configure Access Control Lists And Groups (Bbi Example 1) - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual

Example 3
port.
>> Main# /cfg/acl/acl 1
>> ACL 1# ethernet/smac 002100000000 ffffffffffff
>> Filtering Ethernet# ..
>> ACL 1# action deny
>> ACL 1# stats e
>> ACL 1# egrport 24
>> ACL 1# action deny
>> ACL 1# stats e
>> ACL 1# /cfg/port 23/aclqos
>> Port 23 ACL# add acl 1
>> Port 23 ACL# apply
>> Port 23 ACL# save
In this example, all traffic (Layer 2 known unicast) that ingresses on port 23 from source MAC
00:21:00:00:00:00 and is destined for port 24 is denied.

Configure Access Control Lists and Groups (BBI example 1)

1. Configure Access Control Lists (ACLs).
Click the Configure context button on the Toolbar.
a.
Open the Access Control Lists folder, and select Add ACL.
b.
Use this configuration to block traffic from a source that is destined for a specific egress
Quality of Service
(Define ACL 1)
(Add ACL 1 to port 23)
91