Configurable Trunk Hash Algorithm - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Application Manual
Hp 1:10gb ethernet bl-c switch for c-class bladesystem application guide
Hide thumbs
Also See for 438031-B21 - 1:10Gb Ethernet BL-c Switch:
- Reference manual (252 pages) ,
- Command reference manual (208 pages) ,
- Cli reference manual (190 pages)
Table of Contents
Advertisement
Select Trunk Groups.
b.
Information about each configured trunk group is displayed. Make sure that trunk groups consist
c.
of the expected ports and that each port is in the expected state.
Configurable Trunk Hash algorithm
This feature allows you to configure the particular parameters for the HP 1:10GbE switch Trunk Hash
algorithm instead of having to utilize the defaults. You can configure new default behavior for Layer 2
traffic and Layer 3 traffic, using the CLI menu cfg/l2/thash. You can select a minimum of one or a
maximum of two parameters to create one of the following configurations:
Source IP (SIP)
Destination IP (DIP)
Source MAC (SMAC)
Destination MAC (DMAC)
Source IP (SIP) + Destination IP (DIP)
Source MAC (SMAC) + Destination MAC (DMAC)
Ports and trunking
43
Advertisement
Table of Contents
Troubleshooting
