Chapter 4 Management; Enable Remote Management - NETGEAR ProSafe WNAP320 Reference Manual

Management
4.
This chapter describes how to use the management and monitoring features of your ProSafe
Wireless-N Access Point WNAP320. This chapter includes the following sections:
•

Enable Remote Management

• Upgrade the Wireless Access Point Software
• Manage the Configuration File or Reset to Factory Defaults
• Change the Administrator Password
• Enable the Syslog Server
• Monitor the Wireless Access Point
• Enable Rogue AP Detection and Monitor Access Points
Enable Remote Management
Both SNMP and the remote console Secure Shell (SSH) are enabled by default, which
allows for remote management of the wireless access point from a client running SNMP
management software, as well as from a secure shell (SSH) client. The Telnet console is
disabled by default.
on this page
on page 58
on page 64
on page 65
on page 66
on page 60
on page 72
Chapter 4. Management
4
| 55