Advanced Configuration; Hotspot Settings - NETGEAR ProSafe WG102 Reference Manual

This chapter describes how to configure the advanced features of your NETGEAR WG102
ProSafe 802.11g Wireless Access Point. These features can be found under the Advanced heading
in the main menu.
Figure 5-1
The following features are explained:
• Hotspot Settings: Redirect HTTP requests.
• Advanced Wireless Settings: Set up advanced wireless LAN parameters.
• Access Point Settings: Enable wireless bridging and repeating.

Hotspot Settings

If you want the access point (AP) to capture and redirect all HTTP (TCP, port 80) requests, use this
feature. For example, a hotel might want all wireless connections to go to its server to start a
billing transaction.
Figure 5-2
Enter the URL of the Web server where you wish to redirect HTTP requests.

Advanced Configuration

v1.0, November 2005
Chapter 5
5-1