Modifying Registered Information; Turning Fax Forwarding On/Off - Kyocera KM-2030 Instruction Handbook Manual

(2) Modifying Registered Information

Perform the following procedure in order to modify information
already registered for Fax Forwarding.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
Set original
1. Perform steps 1 - 4 of "(1) Registering", page 4-21.
Program Fax Parameter:
Permit Tel No.
Permit ID No.
Fax Forwarding:
Program fax parameter:
Permit tel nr
Permit number
Fax forwarding
2. Press the Enter key.
3. Use the cursor up or the cursor down key to select the information
you want to modify. Press the Enter key.
* Follow the steps related to the desired information in
"(1) Registering", page 4-21, and change the information as desired.
Fax Forwarding:
Fax For'd Time:Delayed TX
For'd StartTim:09:00
For'd StopTime:17:00
Fax forwarding:
Fax forw. time:Delayed TX
Forward start :09:00
Forward stop
4. If you are finished modifying registered information, press the Reset
key. The operation panel will return to the initial mode settings.
JUL-08-2001 12:00
(Inch)
08-JUL-2001 12:00
(Metric)
P P
(Inch)
P P
P P
P P
(Metric)
P P
P P
(Inch)
(Metric)
:17:00
Section 4 Other Features of this Fax

(3) Turning Fax Forwarding ON/OFF

In order to use Fax Forwarding, it is necessary to turn it ON in advance.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
Set original
1. Raise the cover plate and press the Configure key.
The "Set Fax" menu will appear in the message display.
(Inch)
Set Fax:
End
Line Type
TTI
Set fax:
End
TTI
Print report
2. Use the cursor up or the cursor down key to select "Fax Forwarding".
Set Fax:
Print Report
Password Check Comm.
Fax Forwarding:Off
3. Press the Enter key.
Fax Forwarding:
On
*Off
4. Use the cursor up or the cursor down key to select whether you
want to turn Fax Forwarding ON or OFF.
* The asterisk ( * ) in the message display indicates the current
setting.
Fax Forwarding:
On
*Off
5. Press the Enter key.
The setting for Fax Forwarding settings is complete.
Set Fax:
Print Report
Password Check Comm.
Fax Forwarding:On
6. Press the Reset key.
The operation panel will return to the initial mode settings.
JUL-08-2001 12:00
(Inch)
08-JUL-2001 12:00
(Metric)
(Metric)
(Inch)
:Tone Dial
:Outside P.
(Metric)
:Outside p.
P P
P P
P P
P P
P P
4-23