Kyocera KM-2030 Instruction Handbook Manual page 47

Press the Enter key.
5
v :
Enter Fax No.
v :
Enter fax number
Entering the fax number
6
Use the keypad to enter the fax number you want to register
under that abbreviated number.
* The fax number can be up to 32 digits in length.
v :012345
Enter Fax No.
v :012345
Enter fax number
Designating the abbreviated number for F-Code
7
Based Communication
> If you want to designate this abbreviated number for F-Code
Based Communication, press the F-Code [SUBADDRESS]
key and then proceed to step 8.
> If you DO NOT want to designate this abbreviated number
for F-Code Based Communication, proceed to step 11.
(Inch)
SubAddress:
Enter SubAddress.
Subaddress:
Enter subaddress numbers
(Inch)
(Metric)
(Inch)
(Metric)
(Metric)
(Inch)
20 Digits
(Metric)
20 digits
Section 1 Basic Use of this Fax
Entering a subaddress
8
Use the keypad to enter the corresponding subaddress.
* A subaddress is required during F-Code Based Communication
in order to designate the other party's F-Code Box.
The subaddress can be up to 20 digits in length and can
include any combination of the numerals 0 - 9.
SubAddress:
66385
Enter SubAddress.
Subaddress:
66385
Enter subaddress numbers
Press the Enter key.
9
Password:
Enter Your Password
Entering an F-Code password
10 An F-Code password is used during F-Code Based
Communication. However, you do not have to enter an
F-Code password here if you determine in advance with the
other party not to use one.
> If you want to register an F-Code password, it can be up to
20 digits in length and can include any combination of the
numerals 0 - 9 and the symbols "
> If you DO NOT want to register an F-Code password,
proceed to step 11.
Press the Enter key.
11
Enter Destination Name
Entering the other party's name
12 Enter the name of the other party.
* The name of the other party can be up to 20 characters in
length. (Refer to "Entering Characters", page 1-30.)
M.K.W
Enter Destination Name
(Inch)
20 Digits
(Metric)
20 digits
20 Digits
" and "#".
1-39