Setting The Number Of Rings (Tad Reception) - Kyocera KM-2030 Instruction Handbook Manual

Fax system (b)
Hide thumbs Also See for KM-2030:
Table of Contents

Advertisement

Setting the Number of Rings
(TAD Reception)
If a separately purchased telephone with answering machine
capabilities is connected to this fax machine and TAD reception is
turned ON – but the answering machine capabilities of the telephone
are turned OFF – the number of times the fax will let the telephone
ring before switching to fax reception can be set here to any number
between 1 - 15. When a call from a facsimile comes in, this fax will
switch to fax reception after the number of rings designated here.
(Refer to "TAD Reception", page 4-3.)
* BE SURE to select a setting here that is a LARGER number than
the setting made in the answering machine. If you cannot set the
number of rings in your answering machine, select "15 Times"
in this procedure.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Set Document
Set original
1. Raise the cover plate and press the Configure key.
(Inch)
Set Fax:
End
Line Type
TTI
Set fax:
End
TTI
Print report
2. Use the cursor up or the cursor down key to select
"#Rings(TAD)"[" Nr rings-TAD "].
Set Fax:
Bulletin Board:Delete
# of Rings
#Rings(TAD)
Set fax:
Bulletin board:Delete
Nr of rings
Nr rings-TAD
3. Press the Enter key.
JUL-08-2001 12:00
(Inch)
08-JUL-2001 12:00
(Metric)
(Metric)
(Inch)
:Tone Dial
:Outside P.
(Metric)
:Outside p.
P P
(Inch)
: 2Times
:10Times
(Metric)
: 2Times
:10Times
Section 6 Various Settings and Registration in this Fax
4. Use the cursor up or the cursor down key to select the number of
times the fax will let the telephone ring.
* The asterisk ( * ) in the message display indicates the current
setting.
# of Rings (TAD):
*10Times
Number of rings (TAD):
*10Times
5. Press the Enter key. The setting for the number of rings in the
TAD Reception mode is complete.
Set Fax:
Set fax:
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
11Times
12Times
11Times
12Times
Bulletin Board:Delete
# of Rings
: 2Times
#Rings(TAD)
:12Times
Bulletin board:Delete
Nr of rings
: 2Times
Nr rings-TAD
:12Times
(Inch)
(Metric)
(Inch)
(Metric)
6-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents