Installing A Hard Disk Drive (Sr1530Cl); Figure 35. Locating Drive Positions (Sr1530Cl); Figure 36. Removing Drive Carrier From Server System (Sr1530Cl) - Intel SR1530CL User Manual

Installing a Hard Disk Drive (SR1530CL)

Note: If you are replacing a hard disk drive, see
page 44
1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server. Unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Locate the drive position you want to use.
5. HDD1 location only: Slide the power cables from the cable clip that is located on
the top of the hard drive carrier.
6. Remove the screw that secures the hard drive bracket to the chassis (see letter "A"
in the following figure). Save this screw. You will use it later to reinstall the drive
assembly. Lift the drive carrier from the chassis (see letter "B").

Figure 36. Removing Drive Carrier from Server System (SR1530CL)

®
Intel Server System SR1530CL / SR1530HCL / SR1530HCLS
for instructions first. Return to these steps when directed.
iii.
28.

Figure 35. Locating Drive Positions (SR1530CL)

"Removing a Hard Disk Drive (SR1530CL)" on
B
A
"Safety
"Removing the Server
AF001177
AF001050
41