Installing The Heat Sink(S); Figure 26. Removing The Socket Cover - Intel SR1500AL - Server System - 0 MB RAM User Manual

10. Remove the protective socket cover (see
Note: Retain the protective socket cover for use when removing a processor that will not be
replaced.
11. Lower the CPU load plate and lower the socket lever completely.

Installing the Heat Sink(s)

The heat sink has Thermal Interface Material (TIM) located on the bottom of it. Use
caution when you unpack the heat sink so you do not damage the TIM.
1. Set the heat sink over the processor, lining up the four captive screws with the four
posts surrounding the processor.
2. Loosely screw in the captive screws on the heat sink corners in a diagonal manner.
Do no fully tighten one screw before tightening another.
3. Gradually and equally tighten each captive screw until each is firmly tightened.
®
Intel Server System SR1500AL User's Guide
A

Figure 26. Removing the Socket Cover

Figure 26).
B
TP02076
35