6. Install the server system cover. For instructions, see
7. Install the front bezel. For instructions, see
8. Plug all peripheral devices and the AC power cable(s) into the server.
Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the front bezel if it is installed. For instructions, see
Bezel".
4. Remove the server system cover. For instructions, see
Cover".
5. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system as shown in the figure below.
®
Intel
Server System SR1500AL User's Guide
Figure 61. I Installing the Rack Handle
AF000377
"Installing the System
"Installing the Front
Bezel".
"Removing the Front
"Removing the System
Cover".
"Safety
71