Removing A Slimline Optical Drive Or Internal Usb Floppy; Figure 35. Installing An Optical Drive Assembly Into The Server System - Intel SR1500AL - Server System - 0 MB RAM User Manual

Figure 35. Installing an Optical Drive Assembly into the Server System

14. Install the server system cover. For instructions, see
15. (Optional) Install the front bezel. For instructions, see
16. Plug all peripheral devices and the AC power cable(s) into the server.

Removing a Slimline Optical Drive or Internal USB Floppy

1. Observe the safety and ESD precautions at the beginning of this book. See
Information".
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the front bezel if it is installed. For instructions, see
Bezel".
4. Remove the server system cover. For instructions, see
Cover".
5. If removing an internal USB floppy drive, unplug it from the backplane.
6. Press the blue release lever (see letter "A") to unlock the optical drive tray and
remove the slimline optical drive tray assembly from the server system as shown in
Figure
44
36.
"Installing the System
"Installing the Front
"Removing the Front
"Removing the System
®
Intel Server System SR1500AL User's Guide
AF000355
Cover".
Bezel".
"Safety