Device Selection - HP BB118BV - StorageWorks Data Protector Express Package User's Manual & Technical Reference

NOTE:
Once you have used a device in a backup job, that device will appear in the Devices list for
future jobs, even if it is no longer online. This allows you to later create additional jobs for a
USB device even if it has been unplugged.
8.
The location of Media to be used defaults to the same location as the job that we are creating. So
does the New media location, which is the place, where the job will store the media if it creates
a new media. Note that these are the folders used to organize the media for this job and are
not the physical media itself.
NOTE:
This folder hierarchy makes it easy to locate specific objects and we will not change these
defaults.
9.
In the Auto Format section, accept Auto format all media and give the media a name, such as "My
First Disk Backup — Media" in the New media name field. The New media name is a friendly
name you will use to identify the physical media, e.g., during a restore. You can optionally add a
password to the media, if desired.
10. Click Next to move to the Job Options step.
In Modes select:
Backup mode = "Full"
Auto verify mode = "No verify"
Write mode = "Overwrite all media"
Span mode = "Restart file"
Change mode = "Prompt for another media"
Ignore the Log options and Advanced options for this example.
For more information on backup job options, see Options.
Figure 9 Device selection
User's Guide and Technical Reference
33