Post Execution Commands; Post Execution Job Property - HP BB118BV - StorageWorks Data Protector Express Package User's Manual & Technical Reference

• Do not stop job if the following error code range is returned: When checked, a range of error
codes must be specified which are treated as warnings. If the return code is zero or is within
the specified range, the job continues. However, if the return code is non-zero and outside of
the specified range, the job to be stopped.

Post Execution Commands

The post execution job property controls what shell commands should be executed after the job completes
with no error or with error.
Figure 80 Post Execution Job Property
• Command to execute if job completes with no error: This command will execute if the job
completes with no final error. A job can complete with no error, even if all hosts are offline. This
does not mean that anything was backed up, it just means that the job was not cancelled, or
there wasnt some other major problem executing the job.
• Run command on all hosts selected in job, as well as the Backup Server: When checked,
processes the command on all machines selected in job. When unchecked, only runs the
command on the Backup Server.
• Command to execute if job completes with error: This command will execute if the job completes
with an error, such as no specified devices, or operator cancelled. This does not mean if any of
the objects selected by the job fail to be backed up/restored/ or verified.
• Command path: Specifies a full path or relative path, to a shell command, including command
parameters. For instance cmd.exe /c explorer.exe or c:\windows\explorer.exe. A
User's Guide and Technical Reference
109