Status; Connections Page - HP BB118BV - StorageWorks Data Protector Express Package User's Manual & Technical Reference

Backup Simulates data transfer during a backup job. The local machine sends a large packet; the
remote machine sends small replies acknowledging receipt of the data.
Restore Simulates data transfer during a restore job. The remote machine sends a large packet; the
local machine sends small replies acknowledging receipt of data.
Full (large packet)
Select With data checking to send a known byte pattern between machines. The receiving machine
will verify the pattern.
Click Start to begin the test. As the test runs, the Communication status fields reflect the results of the test.
Click Stop to end the test. The final results appear in the Communication status fields.

Status

The following communication status information is displayed on this page:
Packet number
in the test.
Transfer rate (KB/sec)
second.
Transfer rate (MB/min)
per minute.
NOTE:
Use this information to identify current transfer rates between machines. If the rates are less than expected,
try one or more Data Protector Express optimization strategies.
Related topics
For information about optimizing backup jobs by increasing data transfer rates, see
Strategies for Faster

Connections page

Applicable objects: Machine
The Connections page shows the active connections for this machine. It is for information purposes only.
Connections are established for varying purposes and are automatically opened and closed as necessary.
310
Troubleshooting
Send a large-sized packet of data between remote and local machine.
This is the number of data packets sent from one machine to another up to this point
The rate at which the test data packets are being transferred in kilobytes per
The rate at which the test data packets are being transferred in megabytes
Jobs.